How to Fix a Broken Fishing RodMethod 1 of 3: Mending a Snapped Fiberglass Rod Download Article. Sand or cut the broken ends of the rod so they’re flush. …Method 2 of 3: Replacing a Rod Guide Download Article. Cut the tape or thread around the broken guide with a razor blade. …Method 3 of 3: Changing a Rod Tip Download Article. Heat the tip top of your fishing rod with a lighter to loosen the adhesive. …
People also ask
Is it possible to repair a broken fishing rod?
Although the newer materials are more resilient, modern fishing rods still can break, but in most cases, a broken fishing rod can be repaired. The following steps describe how to fix a broken fishing rod and replace broken rod guides.
What to do if your fishing rod is too big?
If the inserting rod is slightly too big, the two pieces will not sit flush up against each other, so keep that in mind when measuring as well. Use a piece of the blank that is slightly smaller than the area you are inserting it and put it in to test it.
How do you put epoxy on a fishing rod?
Push the 2 pieces of the rod together so they’re flush. Let the epoxy set overnight so it firmly adheres to the rod. The epoxy doesn’t set right away, so you can still rotate or move the rod pieces once you slide them together.
What’s the best way to fix a broken fishing pole?
Open your 2-part epoxy and pour it into a bowl. Use a paintbrush to spread a thin layer of the epoxy on the exposed end of the fiberglass pole. Once the 2-part epoxy is mixed, work quickly so it doesn’t dry or set before you put your rod back together. You can buy 2-part epoxy from any hardware or craft store.