[tp widget="default/tpw_default.php"]

how to do kite fishing插图

How to Fish with KitesAir Out Whereas live baits are used nearly exclusively under a kite while at anchor,drifting or slow trolling with lures and/or freshly rigged natural baits like flyingfish,mullet,mackerel and skirted ballyhoo are deployed as “skipping” offerings when pulled with an airborne assist. Advertisement …Launching Tricks First and foremost,keep a clean and unobstructed cockpit. …Strike Time …

How do you kite fish in saltwater?

Kite fishing is a fun, effective way to catch saltwater fish in both shallow and deep waters. This method of fishing uses a kite that’s flown in the air with a bait line attached to it by a release clip. When a fish bites, the bait line is released from the clip so you can reel in your catch. Kite fishing can be done on a boat or from the shore.

How does kite fishing work?

When a fish bites, the bait line is released from the clip so you can reel in your catch. Kite fishing can be done on a boat or from the shore. It may seem complicated at first, but once you get used to the setup, you can use this technique to easily catch all kinds of fish, including swordfish, sailfish, and tuna.

What do you need to start kite fishing?

You’ll need a metal kite fishing ring, a fishing cork, a weight, and circle hooks. These items will help you attach your bait line to the kite line, monitor your bait when it’s in the water, and hook your catch when it bites. Get light-weight fishing leader. Fishing leader is the thin line that connects regular fishing line to the hook.

How to use a kite fishing rod?

Buy a fishing rod to hold your bait line. The bait line is the line that your bait will be attached to. A regular fishing rod will work, but it may be easier to use an electric rod. Kite fishing involves a lot of reeling, and an electric rod will make reeling in the line easier for you. [3] Get a kite release clip kit.

How to hook up a kite to a rod?

To connect your kite to the line, take your kite swivel (the small metal ring at the end of the lines on your kite) and hook it into the ball-bearing swivel at the end of your kite line.

How does kite fishing work?

Kite fishing works best with live bait. Live bait is kept near the surface of the water by the kite, where it struggles and attracts large, hungry fish. That’s what makes kite fishing so effective — fish are more likely to bite if the bait is up at the surface of the water.

What do you need to hook a kite?

Bring all the supplies for your bait line. You’ll need a metal kite fishing ring, a fishing cork, a weight, and circle hooks. These items will help you attach your bait line to the kite line, monitor your bait when it’s in the water, and hook your catch when it bites.

How to catch saltwater fish?

Kite fishing is a fun, effective way to catch saltwater fish in both shallow and deep waters. This method of fishing uses a kite that’s flown in the air with a bait line attached to it by a release clip. When a fish bites, the bait line is released from the clip so you can reel in your catch.

What is a kite release clip?

Get a kite release clip kit. Release clips are the clips you’ll attach your bait line to your kite line with. Kite release clip kits come with pre-drilled clips, swivels, and snaps all in one, so you can quickly assemble them when you’re ready to go kite fishing.

How long should a kite reel be?

Look for a high-speed revolving spool reel for the best results. Choose a kite reel that’s about 3 feet (0.91 m) long. You’ll want to spool your kite reel with 50–80 pounds (23–36 kg) line, like a Dacron or braided Spectra line.

How to get a kite to sink down?

Any kind of medium-sized balloon will work. Use a small piece of wiring to secure the tied knot at the end of the balloon to one of the bars on your kite before you go out fishing.

Why Kite Fishing From Shore?

The other use of a fishing kite is to get your line past the breakers when fishing the shore. You can catch bigger fish and more varied species by getting out deeper. This is a less common tactic in the U.S. but one that is very fun if you get the opportunity to do it.

What is a kite attached to?

The kite is attached to a reel and a short pole with kite line. On your kite line, you will have a couple of kite clips that you will support your fishing line. You may see balloons attached to many fishing kites.

How to bait a kite rig?

The standard method of baiting a kite rig is to stitch the bait on with a rubber band. This keeps the hook exposed and the bait able to swim more naturally. It is highly recommended that you use this method for kite fishing. That is the full setup.

How long is a kite reel pole?

The main traits you want are a large line capacity and quick retrieval. The pole is often purpose-built and around 36 inches long. That covers the kite setup.

What direction do you have to be when kite fishing?

The hang-up with kite fishing from shore is that you have to have the wind in the right direction. The wind will need to be coming from behind or at a real angle.

What makes a shallow reef attractive to predatory fish?

Shallow reefs and rock piles are frequently home to populations of baitfish. This makes them very attractive to predatory fish. Predatory fish makes them very attractive to fishermen but the danger keeps them away. You and fly a fishing kite more than a hundred feet and put them directly over these hard to fish spots.

Why do you need a balloon to fly a fishing kite?

Sometimes the balloons may be helium filled to help keep the kite in the air when the wind is low.

How fast can you bridle a bait?

Regardless of the technique you use to bridle a bait, the trick is to do this fast. As quickly as possible. Get the bait back into the water swiftly in order to maximize its chance of remaining frisky on the leader. Pro kite fishermen can bridle a bait in under five seconds and have it deployed in the water.

How to increase hookup ratio on kites?

Use super strong bridle bands, a sharp rigging needle, and master the technique . After you’ve bridle rigged baits about 100 times – you’ll be an expert!

What hook do you use for kite fishing?

This is often subjet of great debate and selecting the right hook for the conditions or target species can make all the difference. For most general purpose kite fishing, a 6/0 or 7/0 circle hook is used. The Mustad Demon Circle is the most widely utilized tournament hook but Owner and Gamakatsu also find their way into the mix. The advantage to fishing circle hooks on kite lines is that you can let the fish run with the bait and there’s often a significant amount of line between you and the fish. Reeling like a maniac to get tight on a running fish leaves alot of time for a J hook to fall out of the fish’s mouth, and still requires you to set the hook once you get tight. With a circle hook, you can pretty much just wind till you’re tight and the fish will be hooked in the corner of the mouth.

How to fly a kite in the wind?

Once the boat is positioned into the wind, you can stand at the stern of the vessel and extend your arm with the kite, holding it by the cross bracket at the back. Once you catch the wind the kite will swing away from the boat and begin flying back behind the boat. If you weighted the kite properly so it will fly out away from the boat in the direction of the rigger, you’ll be in good shape. It looks something like this:

Why use J hooks for tuna?

If you’re kite fishing for tuna, for example, J hooks are often preferred because they are likely to set deep inside the fish (tuna are ram feeders – they use speed to inhale the bait since they can’t exactly swallow). Sailfish on the other hand are not usually aggressive feeders – they rise up to the bait and engulf it…then run like crazy when they realize something isn’t right.

What is the best electric fishing reel?

There’s really not much debate remaining about the “best” electric kite fishing reel on the market today. The Daiwa Tanacom Bull is the most commonly utilized electric reel for kite fishing by the Miami charter fishing fleet.

What are tournament kite fisherman?

Tournament kite fisherman are maniacs about rigging. Every professional crew has a slightly different way of doing things…and each crew will tell you they do it the best. From the knots they use, to the swivels, to the size of the weights (even the corks) each little detail plays an important role in how a bait will present when deployed. Remember, the overall goal here is to present a very frisky bait at the surface without the fish really being able to see the leader while keeping the hook exposed in a way that is most likely to set when a fish grabs hold and makes a dash for the horizon. There’s a few subtle tricks i’ve learned fishing with different crews through the years, so here’s a few tips that i’ve picked up along the way:

How to release kite clip on boat?

Your kites are flying now, and are about 50’-75’ off the back of your boat. Along your kite line, you should have a small barrel swivel tied every 50’ or so feet along your kite line. Use a snap swivel and attach your first kite clip to the kite line. Set the pressure of the clip release by tightening or loosening the setscrew on the clip. You want the clip to release with slightly more pressure than the baitfish will exert.

How to catch fish with a fishing reel?

When the fish strikes you may see a visual indication like a swatting bill, exposed fin, surface boil or splash. Wait for the bite and free spool the fishing reel and let the fish eat the bait . When the fish begins to peel line quickly lock up and begin to wind up the slack out of the line. When you come tight, the line will pop out of the pressure release clip and there will be slacker to take up. Keep winding until you come tight on the fish. When you come tight, set the hook with a couple gentle but firm tugs with the rod.

How to fly a kite?

The wind rating for the kite should be listed in its manual. Launch your kite from the highest point you can on your boat. If you are going to fly 2 kites simultaneously, you will want to put a small lead on the lower corners of each kite, depending on which direction you want each kite to spread to. The weight for this should be about 1/8 ounce for light kites and about ½ ounce for heavy kites. If weighted properly, the kites should spread apart from each other enough so that when the baits are out, the baits cannot get tangled together.

What is the best way to catch sailfish?

Perhaps the most effective of these types of fishing is kite fishing. Kite Fishing is a technique of fishing that involves flying kites in order to suspend live baits on the top of the water. This type of fishing is highly effective for sport fishing off the Atlantic coast, where the Gulf Stream current and the natural reef running along the coastline, coincide. Sport fishing charter boats have been using this technique for 20 years to hook into the wide array of big game species that swim through our waters. This article is written in order to teach basic tactics on how to go about kite fishing.

What is the best bait for kite fishing?

For kite fishing, live bait is required. The best and hardiest baitfish include goggle eyes (probably the most effective bait for this type of fishing), tinker mackerels, blue runners, pilchards, mullet, sardines and threadfin herring. When kite fishing, you are mostly immobile. You will drift whichever way the current is moving, but you can make small corrections with your engines. So first thing is to select a good area or depth of water to fish. Off the shore of Fort Lauderdale, one of the best areas is the 90’-120’ natural reef that runs along its coast. Other good areas are where there is a rip current, a temperature gradient, a color change or over the top of an artificial reef, such as a shipwreck. These are all good areas to begin fishing, and bear in mind that winds and currents will push you around a bit, so plan ahead.

Is kite fishing good?

Kite fishing is a very exciting and effective because you get to see the whole bite sequence and the hook up ratio is usually very high. It takes quite a bit of practice to become proficient with kite fishing technique. Keep trying though.

How to tell if you’re about to get a bite?

Indicators that you are about to get a bite are: ? The bait fish is going nuts and splashing more vigorously than normal. ? You see splashes and “boils” on the top of the water around the bait. ? You see a sailfish or shark fin out of the water next to the bait.

How does a mate work on a fishing rod?

The mate has to coordinate with the captain and let line out from the fishing rod at the same time. Once the bait is the desired distance from the boat, the mate must make constant adjustments to keep the bait right on the top of the water, struggling.

What bait do you use for kite fishing?

For kite fishing, live bait is preferred. Start off by catching or buying live baits. Only certain types of baitfish will work effectively in the kite. These baitfish include Pogies, Mackerels, Bluefish and Herring.

How far off the back of a boat should you put a kite?

Your kites are flying now, and are about 50’-75’ off the back of your boat. Along your kite line, you should have a small barrel swivel tied every 40’ or so feet along your kite line. Use a snap swivel and attach your first kite clip to the kite line.

What is the most effective type of fishing?

Perhaps the most effective of these types of fishing is kite fishing. Kite Fishing is a technique of fishing that involves flying kites, and using the kites to suspend live baits on the top of the water.

Why do captains put ribbons on their fishing lines?

This helps visibility if there is a glare and the bait can’t be found at a quick glance.

How to fly a kite?

Aim the vessel into the wind, set its speed to around 5 mph or so, and launch the kite, making sure to stay clear of any bulkheads or console and the subsequent backdrafts that will impede the launch. Fly the kite out until its first or second release clip, based on the desired distance of the bait. Hold the ring guide on the fishing outfit, and free-spool the bait back 100 feet or so. Attach the ring guide to the ­kite-release clip and adjust the setting, making sure it’s firm enough to withstand the rigors of drag ging a bait across the surface

Why do captains increase and decrease trolling speeds?

In desperation to get a strike, captains increase and even decrease trolling speeds as fast as baits are switched out. It becomes even more aggravating when typically aggressive dolphin follow suit.

How to rig a flyer for tuna?

To rig one of these flyers for tuna, dolphin and even wahoo, use 4 feet of monofilament or fluorocarbon leader (100-pound-test for the smaller versions and dolphin, and 150-pound-test for the larger flyers and tunas). Tie a barrel swivel onto one end of the leader. Next, run the leader through the nose of the flyer and body cavity, and position the hook so it exits at the base of the tail, or very close to it (spacer beads might be required to position the hook). When trolling small flyers for school and medium dolphin and tuna, use a long-shank 7/0 or 8/0 hook; for pulling a big flyer on 50-pound-class tackle and for large tuna, opt for a 9/0 extra-strong long-shank hook. To thwart wahoo cutoffs, attach a short length of 270-pound-test, 7-by-7 cable to the eye of the hook and its opposite end to a barrel swivel, which should be positioned just in front of the bait’s nose (and then tie leader to this swivel); the cable will prevent cutoffs, while the swivel alleviates line twist.

How to control a kite?

For best control, troll into the wind, or at an angle to it; you’ll want the kite/bait to track behind the boat without interference or at an odd angle when a fish strikes. To keep control of the kite during a ­downwind pass, pick up enough speed to overcome any wind hailing from the same direction.

Why do kites roam on trolls?

The kite will have a tendency to roam on the troll, with the ­slightest variations in course and wind ­direction shifting it over to the ­respective side — hence the reason for spreading the outriggers and ­removing the center rigger — to avoid contact with the kite line and possible tangles. Aboard large ­sport-fishing boats, you can run the kite line through an outrigger kite ring for ­maximum ­clearance.

What is natural match?

Natural Match: A range of artificials in various sizes and several species patterns allows for a more accurate replication of the existing forage. File Photo

What does Peter do with his kite?

And in this great kite fishing tutorial, Peter gives some of his best tips on how he catches sailfish using kites , including which kite clips, weights, and hooks he uses. Peter even lands a fish on his kite rig while giving the tutorial! Well done Peter you fish whisperer!

What to do if playback doesn’t begin?

If playback doesn’t begin shortly, try restarting your device.

Who has caught more sailfish using kites than 99% of Americans?

Peter Miller of Peter Miller Fishing and Bass2Billfish has caught more sailfish using kites than 99% of Americans…

Does Peter land a fish on his kite rig?

Peter even lands a fish on his kite rig while giving the tutorial!

Can you fish with a kite?

Of course, there are countless fishing shows and YouTube fishing videos that involve kite fishing, but very few took the time to do a purely instructional video on how to catch saltwater fish with kites.

Can you add videos to your watch history?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What color line to use for kite reel?

When it comes to braided line for use as kite line, my personal preference is 80 LB test Jerry Brown solid spectra. There is no need to go hollow core for this application. Jerry Brown solid line is available in White, Blue, Yellow, and Green. I like to use the white-colored line to spool (fill) the kite reel, and then use green, blue, and lastly high vis yellow for the scope (distance from the kite to the release clip closest to the kite). Rigging the reel with different colors allows the angler to easily visualize release clip deployments. Is that a must? No, not really, you can use just one color. The new Jerry Brown Patriot line, which offers red, white, and blue colors at 10 FT intervals is an excellent choice, not only is it high vis but since it is metered at 10 FT increments, it allows for easier rigging/placement of your release clips by eliminating the "measuring" factor. JB’s Patriot line is hollow core, so it is a "tad" pricier, but you are only purchasing 600 yards, which is plenty to fill most electric and manual kite reels. JB also makes the Decade line, which will work fine, but it is not as high-vis as Patriot. New for 2019 at JB is orange, but it is only available in the hollow core line. If JB is not your gig, Powerpro and Momoi also make an outstanding product. When it comes to braid, you want to use a braided line that has at least 8 carriers (threads) per braid, no less.

Why do kites have holes?

The holes are to allow wind to go through them alleviating wind pressure on the surface area of the kite that results in a steady flight pattern. The diameter of the holes, as well as the number of holes, are different from kite to kite. Here is a brief description of each of the high wind kites, and hole patterns associated with each one:

What kind of kites do they use in Cali?

In Cali, they troll a little faster than just bump trolling, so they use a mix of sparred fishing kites such as the worlds best fishing kite, SFE, as well as parafoil kites, such as the Boston Big Game Club fishing kite. It is always exciting to see new anglers using kites to fish.

Why is my kite line not working?

When using either Dacron or Braid it has been my experience that none of these lines are fans of friction. The most common cause of kite line failure occurs naturally when you are fishing off either a center console or sportfishing boat. Throughout the drifting process, there are times that we correct the attitude of the boat to correct for both wind and/or current directions. When making such corrections it is important to keep an eye on your kite line and make sure that the line is not rubbing up against your t-top, or other structures such as outriggers, rocket launchers, etc. This mostly occurs when drifting however, it may also happen when trolling. Dropping a kite in the water, especially while trolling, will most likely break the spars of the kite if any pulling takes place when it is submerged. The best recipe to avoid a sinking kite is to tie a small balloon filled with air to the spars behind the kite, that will keep the kite floating instead of sinking, and it will not affect flight.

What is the line to a kite called?

The line to the kite is called the "kite line". When your target species eats the bait and starts to swim with it, the release clip opens, and your fishing line is released. Kite fishing allows for 100% stealth when it comes to hiding fishing leaders and hooks.

How far apart should you use a kite release clip?

As far as the spacing between baits/release clips, you can use anywhere from 30 to 50 feet, or more if you wish. The spacing is more personal preference than anything else, it also is important when you are flying more than one kite simultaneously.

What is drift control?

A drift control device will do the trick, at a substantially lower cost. Anglers fishing far offshore may want to invest in an actual sea anchor, however, if you are fishing close to shore, a drift device will serve you well.