[tp widget="default/tpw_default.php"]

how to crimp mono fishing line插图

How To Crimp Monofilament Fishing LineSlide the thimble through the eye of the swivel.Put the thimble inside the crimpers and close the thimble. Now the thimble should be closed around the eye of the swivel. …Slide the crimping sleeve onto the monofilament line.Slide the line through the eye of the swivel.Wrap the line around the thimble and slide the leader material back through the crimping sleeve. …More items

How to crimp monofilament fishing line?

How To Crimp Monofilament Fishing Line Slide the thimble through the eye of the swivel. Put the thimble inside the crimpers and close the thimble. Now the thimble should be closed around the eye of the swivel.

How to crimp monoline hooks?

So, there is no such thing as one perfect crimper for all monoline. Now, you need to put the crimp on the monoline, pass the line through the hook and then bring it back to the crimp. The line should be fully into the crimp on both ends, and the hook should be in the proper orientation.

What size crimp line should I use?

It comes down to the size of the line you are using. You can crimp 80 and 100Lb mono and you can also tie knots with this mono, but when you start going 200Lb + you really need to start crimping. 1) Rigging Trolling Lures – When rigging trolling lures anglers use anywhere from 40LB mono all the way up to 600Lb monofilament.

What is the best crimping tool for fishing?

Single barrel crimps are adequate for monofilament line and for smaller fish species, and double barrel crimps give you insurance when using cable. Double-sleeving also allows you to put more space between hook eyes and lures . Make sure to use the proper crimping tool. If you are crimping above 250 pounds, you’ll want a big tool.

What Is Crimping?

Learning how to crimp monofilament fishing line is a very useful skill — it’s very similar to crimping other line but for now we will focus on monofilmaent. Its purpose is to connect lures, hooks and other terminal tackle to the fishing line or cable when the line is too thick to tie good knots.

What is the best crimp for saltwater fishing?

Also, aluminum crimps and sleeves typically form better to monofilament line and fluorocarbon leader, while brass and copper react better with cable.

Why is it important to crimp a leader sleeve?

This is important because it protects the monofilament from being damaged when it’s crimped which will overall weaken the performance of your leader. Crimp the sleeve by closing the crimper. The two edges should look slightly pinched, and there’s a little barrel in-between.

How to put leader line back in crimp?

Wrap the line around the thimble and slide the leader material back through the crimping sleeve. Once you put the leader line back through the crimp, take your pliers and cut a little “mushroom” end onto the end of it. This way, when you slide it back into the crimp, it won’t pull all the way through and out of the crimp.

What is a single barrel crimp?

Single barrel crimps are adequate for monofilament line and for smaller fish species , and double barrel crimps give you insurance when using cable. Double-sleeving also allows you to put more space between hook eyes and lures . Make sure to use the proper crimping tool.

Where should crimper sleeve be placed?

Place the sleeve in the correct slot size of the crimper, and make sure the sleeve is positioned upright and in the center of the crimper slot; both ends of the sleeve should be extended outside of the slot. This is important because it protects the monofilament from being damaged when it’s crimped which will overall weaken the performance of your leader.

When to use a thimble?

3. Always use a thimble when crimping cable or monofilament. It will prevent the mono from stretching and the cable from kinking. The thimble also improves the performance of the swivel.

How to work fluoro leader?

Working a mono or fluoro leader through the correct-size sleeve can be challenging due to the tight fit. By cutting the leader at an angle to reduce its initial diameter and then moistening it with saliva, it should penetrate the sleeve easily. Prior to crimping, leave a short tag end.

What is a crimper with a notch?

Crimpers with a notch are designed for round sleeves. Mono up to 200-pound-test is easily crimped with a hand swage, whereas a bench swage is more precise for leaders over 200 pounds. Avoid crimping near a sleeve edge.

Why do they use zinc sleeves?

Harry’s Fishing Supply opts for zinc-plated sleeves versus aluminum with cable leaders to prevent electrolysis from the two metals like a zinc anode does on an outboard. For mono and fluoro, both Liederman and Mola are proponents of aluminum ­because it shapes best to those materials and provides the snuggest fit.

What is crimping job?

A professional crimping job decides whether you and the crew celebrate an incredible catch or partake in a long, depressing ride back to the dock — and we’ve all been on both sides of that coin. As basic as crimping seems, the “art” is anything but elementary. ­Selecting the correct sleeve and material, sizing it to the leader and properly executing the connection are crucial. To keep you and your next big fish from parting ways unexpectedly, heed the insights that follow.

What is the purpose of crimping the bitter end of a sleeve?

On cable, ­crimping the bitter end of a sleeve ­prevents slippage. ­Liederman compresses the tag end and flares the end facing the hook.

What is the objective of crimping?

The objective of ­crimping, beyond forming loops and attaching hooks, is to compress a leader and meld it with the sleeve ­without damaging it. Read: zero slippage. Hence, it is critical to size the sleeve diameter to the leader.

Why use double barrel sleeves?

Double-barrel sleeves are also popular with cable rigs due to the exceptional bite the two metals generate. More on specific cable sleeves in a bit.

How much mono to crimp for trolling?

You can crimp 80 and 100Lb mono and you can also tie knots with this mono, but when you start going 200Lb + you really need to start crimping. 1) Rigging Trolling Lures – When rigging trolling lures anglers use anywhere from 40LB mono all the way up to 600Lb monofilament.

How much monofilament do swordfish use?

You will need to crimp this mono for the best results. 3) Making Swordfish Rigs – Swordfish rigs most commonly use 300-400Lb monofilament, skip tying knots for these rigs and grab your crimpers.

How much mono to use for yummy flyers?

5) Rigging Yummy Flyers – When rigging yummy flyers you may want to use 200-300Lb mono, these fish aren’t going to be line shy since half the time your bait won’t even be underwater. Time to pull out the crimpers.

Is crimping better for mono?

To sum up this article, you as your mono gets thicker (200Lb test and above) you are going to want to start crimping. Crimping is better for heavy mono because as it gets thicker knots that you used for lighter lines are either harder to tie, or plain just don’t work. When crimping make sure that you are :

Can you use the wrong crimp sleeve on a Grander leader?

We designed a neat tool so that you will never use the wrong crimp sleeve for your fishing line again. Whenever you add some grander leader coils to your shopping cart you will automatically have the right crimp recommended to you for your grander leader. This is all part of our goal to help you spend more time fishing!

Can you crimp with Bullbuster leader coils?

On Bullbuster.net most anglers crimp when using our grander leader coils. Below are 5 crimpers that we recommend that can be found online.

Does monofilament fishing line get thicker?

As your monofilament fishing line gets thicker, lets say 200Lb test and above, it starts to get bulkier and often stiffer. Many knots that you would use for lighter monofilament are either tougher to tie, or plain out just don’t work with heavy monofilament.

What size crimping sleeves are best for fishing?

Crimping sleeves come in two sizes: short and long. Short sleeves are a better choice for lighter leaders and/or line-shy fish. The long sleeves are better for heavier leaders and situations in which the crimp will not be visible, such as inside the skirt of a trolling lure or within a rigged bait.

What happens if you don’t crimp a sleeve?

If you don’t crimp a sleeve with enough pressure, the line can slip out. Too much pressure can damage the leader line and cause it to break. A quality crimping tool such as the Hi-Seas Deluxe mini hand crimper comes calibrated for applying just the right amount of pressure to create secure crimps that do not damage the line. To learn how to adjust your crimping tool to create just the right pressure, visit this page.

What brands offer crimp sleeves?

Brands such as Hi-Seas Products offer kits with a selection of crimp sleeves and chafe gear to build your own leaders from heavy monofilament or fluorocarbon line. Jim Hendricks

What is chafe protection?

Chafe protection such as thimbles or tubing keep the leader loop from wearing thin while trolling or battling a fish. “I like to use chafe protection when fishing marlin,” Rotello says. “This is especially important around the hook since a marlin’s bill and mouth are about the same as 60-grit sandpaper.”.

How to modify crimp jaws?

To modify the jaws first select a drill bit one or two sizes larger than the crimp cavity diameter. Start slowly and be sure to drill straight. Drill both sides a little at a time. Test, drill and retest the modification as you go until the perfect flare is achieved . This is an easy process but must be done slowly. Don’t over drill!

What happens if the leader breaks inside the crimp?

If the leader breaks inside the crimp, the crimper is too tight. If the crimp slides, the crimper is adjusted too loose and needs to be tightened. A slight slip in the crimp is better than too tight. I look for the crimp to just start to slide before the main line breaks.

What kind of sleeves do I use for crimping?

Aluminum crimp sleeves are very popular and work great; however, I use the Hi Seas double barrel black nickel plated copper sleeves.

How to make a mushroom flare?

Melt the tag end with a lighter and press the end against the side of the lighter to create the mushroom flare. This safeguard against possible slip helps when pulling the crimp down tight for crimping.

Should you crimp if something doesn’t look right?

Tackle failure is not acceptable and should never happen! If something does not look right, cut it off and do it again. Remember these key points. Always ensure correct sizing when matching crimp sleeves to line diameter. Always use the appropriate crimping tool which has been properly calibrated and modified for a perfect crimp. Now it’s time to start crimping with confidence.

What is the key to pull test?

Pull test the leader. The key is slow and steady pressure.

Do you size up crimp sleeves?

Whenever possible size up the line and crimp sleeves to ensure a perfect snug match before purchasing. To help out here’s a list of our most popular crimp sleeves ( Hi Seas Double Barrel Sleeves) with references to our top selling big game monofilament and fluorocarbon leader line.

How much break strength do you lose with 80 lb line?

Bottom line, with most knots you will lose 20-30% of the line breaking strength. Let’s say you are using 80-lb line and you lose 30% (on the high end). Very few reels can crank out (and very few fisherman can hold) 56 lbs of drag, or even 30 lbs of drag.#N#Therefore you will be pretty safe in most cases with 80-lb line with most knots, as long as you tie it well.#N#If you want or need to preserve more of the actual breaking strength of the line, then you will need to crimp or go with a bimini. A proper crimp or a bimini retains very close to 100%.

How much drag does a knot lose?

Let’s say you are using 80-lb line and you lose 30% (on the high end). Very few reels can crank out (and very few fisherman can hold) 56 lbs of drag, or even 30 l bs of drag.

Is crimping a good idea?

Crimp is fine if the sizes are correct , double nail k not one of the best if mono is not the hard type,lubricate well when snuggin’.

Is it safe to tie 80 lb line?

Therefore you will be pretty safe in most cases with 80-lb line with most knots, as long as you tie it well. If you want or need to preserve more of the actual breaking strength of the line, then you will need to crimp or go with a bimini. A proper crimp or a bimini retains very close to 100%. 1.