How To Cast Shakespeare Ugly StikThe first thing you need to do is thread the line through the guides on the Ugly Stik and collect it around the spool. Many users make the mistake of filling the spool close to the maximum line capacity. …Once the line has been managed properly around the spool,you can adjust the drag settings and the tension on your unit. …More items
How do you use a Shakespeare spinner rod?
Ensure the Shakespeare spinner rod is attached to a spinning fishing reel. Remove the small piece of tape that secures the end of the fishing line to the spool on which it came. Grasp the end of the fishing line between your thumb and index finger and thread the line through the rod guide at the tip of the rod.
What is a Shakespeare spincasting reel?
Shakespeare spincasting fishing reels are closed-face reels with a simple push-button operation to make casting the line virtually foolproof. Disassembling the reel is not much more complicated than using it for fishing.
How to fix a Shakespeare fishing reel?
The first (and probably the most important) step to consider when fixing your Shakespeare fishing reel is to identify what model it is. You can identify the model by its model number (usually printed on a sticker on the reel itself) or design.
How to spinning a fishing reel?
Remove the small piece of tape that secures the end of the fishing line to the spool on which it came. Grasp the end of the fishing line between your thumb and index finger and thread the line through the rod guide at the tip of the rod. Thread the line through each of the rod guides until you are at the spinning reel.
What is a Shakespeare spinning rod?
Spinning rods are one of the most common types of rods, and the Shakespeare company manufactures the spinner rods that many anglers use. But like all varieties of fishing rods, Shakespeare spinning rods are of little use unless they are strung with fishing line.
How far down should you spin a fishing reel?
Spin the handle of the spinning reel as if you were reeling in a fish. Continue spinning it until the fishing line is 1/8 inch below the rim of the reel spool.
How to open a spinning reel?
Open the bale of the spinning reel by flipping it up.
Can you put fishing line on your rods?
While it might be easier to have a friend help in the process, most fishermen can put line onto their rods and reels by themselves once they are comfortable with the process. So if they’re fishing alone and need to replace their fishing line, they can do it.
Who is Larry Anderson?
Larry Anderson has been a freelance writer since 2000. He has covered a wide variety of topics, from golf and baseball to hunting and fishing. His work has appeared in numerous print and online publications, including "Fargo Forum" newspaper. Anderson holds a Bachelor of Arts in print journalism from Concordia College.
What type of reel is a Shakespeare reel?
Also, take note of what kind of reel type your Shakespeare reel is. Shakespeare fishing reels tend to be categorized into two types: trolling (fly reels) and bait casting types.
Why is taking a Shakespeare fishing reel important?
This is why taking the Shakespeare fishing reel is important – not only will you get a clearer picture on how a fishing reel, you may actually repair it while taking the parts out!
How to identify a Shakespeare fishing reel?
You can identify the model by its model number (usually printed on a sticker on the reel itself) or design.
How to protect reels when taking out reels?
Doing so may result in additional damage which cannot be readily fixed. To protect the reel spools, simply cover the reels wrap portion with some masking tape. Once you’ve wrapped that part with some tape, proceed to getting the reel out.
How to keep fishing reels from rolling off?
Once you’ve made sure that the surface is free from any dirt, lay a dry towel or a piece of cloth on it. Try to use a cloth or towel that in a light color. Not only will you be able to keep any of the fishing reel’s part from rolling off the surface – the light hue will allow you to spot the parts easily.
What is spincast reel?
Spincast reels are easy to handle. The most simplest in design and function, this choice is often used by beginner anglers. A simple thumb operation is all that’s needed to reel in fish.
How to check if a repair involves a disassembly and reassembly?
First, you’d get to check if the repair simply involves a disassembly and reassembly procedure. Second, you get to be more familiar with your gear, allowing you to spot any small details that need to be addressed. In terms of screws, make sure that they are tightly fixed in this time around.
How to remove a spindel from a reel?
Turn the spindle and gear assembly upside-down to look at the back of the reel, where a retainer clip installed on top of the spindel holds the gear mecanism in place. Remove this c-shaped clip with needlenose pliers.
What is a Shakespeare spincasting reel?
Shakespeare spincasting fishing reels are closed-face reels with a simple push-button operation to make casting the line virtually foolproof. Disassembling the reel is not much more complicated than using it for fishing. The housing removes in seconds and the internal gear mechanism can be separated into its component parts in a matter of minutes for cleaning, greasing and oiling.
How to unscrew reel cover?
Unscrew the reel cover with the hole for the line by turning counter-clockwise. Set aside the cover.
How to look up a Shakespeare reel?
Use the model number printed on the side of the reel housing to look up the schematic parts diagram for that particular Shakespeare reel. A list of schematics for Shakespeare reels by model number is linked in the reference section. These diagrams will aid in identifying different internal parts.
Who is James Clark?
James Clark began his career in 1985. He has written about electronics, appliance repair and outdoor topics for a variety of publications and websites. He has more than four years of experience in appliance and electrical repairs. Clark holds a bachelor’s degree in political science.
What is it called when a fishing pole breaks?
Identify the parts of your fishing pole. A fishing rod can be a complex piece of equipment so it is wise to learn the terminology before assembling your own. If your rod breaks into 2 parts or more, the joint where the sections fit together is called the ferrule. The male ferrule inserts into a female ferrule.
What is the bale arm on a reel?
The bale arm is the silver overhead piece on the reel. When applying a small amount of pressure, you will be able to flip it up to the other side of the reel. After lifting the bale arm, you will be able to pull the edge of the thread and the reel will unravel it. Use caution here.
How to lock a rod in a rod?
On most rods you will need to rotate the pieces together. Do this by holding the female ferrule and rotating the male piece while they are adjoined. This will lock in your rod.
Which way to thread a rod?
Remember with threading that right is tight and left is loose. When looking at your rod from the back end, threading right will tighten it. In other words, rotating clockwise will tighten the thread, while rotating counter-clockwise will loosen it.
What lures work best for small fish?
A spoon lure will work well for fish that prey on small fish. The spoon will wave back and forth to mimic the movement of a fleeing fish, attracting the bigger predators. If you’re looking for an all-purpose lure, try a spinner. A spinner is a metal piece that will spin in the water as it moves.
How to secure ferrules?
Bring the pieces together. Align the female and male pieces on a flat service. Holding the female ferrule securely, anchor the male ferrule around it. Always ensure that if necessary, any guides to help secure the ferrules are properly aligned.
What do you need to know when setting up a fishing pole?
Regardless of how you like to fish, there are some key elements you must remember when setting up a fishing pole. No matter what type of fish you are hoping to catch, follow basic techniques to ensure your rod is sturdy and lure effective. Steps.