[tp widget="default/tpw_default.php"]

how to adjust a baitcasting fishing reel插图

Here are some tips on how to set up a baitcasting reel:Secure the line to the spool by attaching it to the reel handle or bail.Make sure the line is taut and not kinked.If the reel has a drag system,set the drag system to its minimum setting.Casting is easy! Simply pull the line back until you reach the desired depth,then release the line and watch your lure sail through the water!

How to properly adjust your bait casting reel?

first step in properly adjusting a baitcaster is setting the spool tension. The spool tension knob is located on the same side of the reel as the handle, normally right behind the star drag. To set this, reel your bait almost to the tip of your rod (within a couple inches). Hold your rod up at a 45 degree angle to the ground. Push the

How to choose the right baitcasting reel?

What Do You Need To Know About Baitcasting Reel Sizes?Baitcasting Reel Size ChartLine Capacity. The line capacity of a baitcaster is the longest length that the reel’s spool can handle. …Gear Ratio. A reel’s gear ratio determines the number the spool revolves for each handle revolution. …Drag. …

How to adjust a quantum Accurist baitcasting reel?

Tighten the drag as tight as it will go. The drag on Quantum spinning reels is controlled by a knob on the very top of the reel. Turning the knob clockwise tightens it. Once it is fully tightened, turn the knob counterclockwise two times to loosen it slightly. The reel should give some line with a firm tug.

How do you cast a baitcaster reel?

Part 1 Part 1 of 3: Casting the ReelReel in the line. Reel the line in until your bait or lure is 6 to 12 inches (15 to 30 centimeters) from the rod tip.Hold the reel properly. Grip the rod behind the reel with your thumb resting over the reel spool. …Turn the rod so the reel handles point up. …Press the reel spool release button. …Bend your casting arm. …More items…

What does it mean when a line is about to backlash?

If it looks like the line is about to backlash, it means the adjustments need to be done again. Keep casting and making adjustments until you achieve the desired alignment. You can practice with short casts in your backyard to work on achieving the highest level of control.

How to tighten drag on reel?

Between the reel handle and the reel body is a big star-shaped dial. If you wish to tighten the drag, move this star forward or toward you to make it loose. The drag should be tight enough to prevent it from slipping on the hookset.

What is the setting for magnetic brakes?

Magnetic Brakes. For magnetic brakes, their system uses a dial on the outside of the reel plate. The dial helps adjust the strength of the brake. Both the centrifugal and magnetic brake systems have a setting of 1 to 10. The higher the setting, the more braking will be enabled in your casting. However, only set the brakes at the level …

How to adjust centrifugal brakes?

If using centrifugal brakes, adjust them by pushing them in and out to distribute the pressure evenly. Inside the plate of the brakes, you’ll see an arrangement of evenly spaced colored pegs. When the brakes are in the “out” position, more weights towards the outside will create more centrifugal forces.

What brakes do reels use?

The next thing is to adjust the brakes. Most high-end reels come with centrifugal brakes, which are easier to adjust than their magnetic counterparts. On the other hand, magnetic brakes are less expensive and ideal for beginners.

Why does my spool slow down?

The force on the inside of the spool will cause it to slow down. Ensure you turn the plates in a symmetrical pattern, as this is the only way to balance them. To achieve proportional adjustment, if you turn one brake on, ensure you turn on the one directly across from it.

How to tie a lure for a new lure?

Start with adjusting the tension knob, something you should do each time you tie new lures. Hold it at a 10 o’clock or 2 o’clock angle and reel the lure for between 8 and 12 inches of line. Tighten the knob until you feel some light pressure. Let the lure go down slowly to the ground as you push the thumb bar.

What does centrifugal brake do?

And what the centrifugal brake does, is that it applies some brakes internally on the reel, on the spool on this side. And, again that applies brakes, all the way through the cast, and that helps, again, to reduce some backlash. And the more you have it on, the, the more brakes you’re going to have, the less backlash.

How to adjust a fishing reel?

Anyway, what you want to do, to adjust it is, set your lure up, hang it 90 degrees, or parallel to the boat or to the ground, release the button and let it free spool. It should drop at a slow controlled rate, and once it hits the floor, the reel shouldn’ t backlash. It’ll spin a little bit, but not much, it shouldn’t backlash. If it backlashes too much, readjust as necessary, until you get it to the point where it just stops spinning right when the lure hits the floor. Then you know you’ve got it set up, at least initially, you got it set up correctly.

What does a magnetic brake do?

This has a gauge, usually its one through ten, usually. What the magnetic brake does, is it applies braking more toward the end of the cast than at the beginning. Very useful for when you’re throwing light lures, or you’re throwing into the wind, it works real well for that.

Do bait casters prevent backlashes?

But you know, once you have it set up, that doesn’t mean that, guess what, I’m good to go, I won’t have backlashes anymore. No. These brake mechanisms are not silver bullets, they’re not going to prevent all backlashes. And as a matter of fact, a lot of issues people have with casting bait casters has nothing to do with getting it set up properly. So, let’s go through some of the other issues you can have, and how to overcome those, once you have your bait caster setup.

What adjustments do you need for a Lew baitcast reel?

To get the unmatched performance Lew’s baitcast reels are capable of, you must make the right adjustments to the star drag, the spool tension knob, and the casting brake.

How much drag does a Lew baitcast reel have?

The star drag on some Lew’s baitcast reels, such as the Super Duty Speed Spool, can be cranked down to generate a remarkable 20 pounds of drag resistance. It is exactly what’s needed to horse bass out of dense cover.

How to disengage a spool from a reel?

With the thumb of your casting hand, press on the spool to hold it in place and push down the reel’s thumbar to disengage the spool.

How to access brakes on BB1?

To access the BB1’s brakes, remove the sideplate opposite the handle, which can be done quickly without tools. You will see six brakes fixed to the end of the spool. Four of the brakes are spring loaded. They back off pressure at the end of a cast, which allows for more distance.

What side of the reel should you set the brake on?

Lew’s pro staff angler Mark Rose recommends that you set the magnetic brake on the other side of the reel to 5. This is halfway on a Lew’s reel. As you fish with the reel and your thumb control improves, you will likely fine-tune this adjustment.

What are the main drivers when casting?

Your wrist and forearm, not your shoulder, are the main drivers when casting. To get maximum wrist flexibility, turn the reel handle up when making an overhand cast. Turn the spool up when making the sidearm roll cast.

How much braided line do you use for bass fishing?

For this application, 50- to 65-pound braided line is typically used.

Spool tension

The spool tension knob is always on the side of Baitcast Reel, any kind. Although it looks different, you will always see it there. It works to pressure the spool to make it spin slower when casting, reducing the ability to backlash.

Adjusting Brakes

This job may be more complex than other adjustments. There are two standard brakes on the baitcast reel, including centrifugal brakes and magnetic Brakes.

Setting the Star Drag

The star drag system is in the middle of the handle and reel’s body; having a star shape, you just need to rotate it forward to increase the traction and vice versa to loosen. Continue, what we need is equal, not too loose, so it does not slip on the hookset, and not too tight so that the line does not suffer too much pressure.

Conduct casting

Next is to embark on a practice to make sure that what you read is meaningful. The special thing to note when you adjust your reel while casting is that the goal is not the distance; what you need is the accuracy. The distance will reach the farthest level after many times you practice and master your Baitcast reel.

Conclusion

Spool Tension, Brake System, Star Drag are the adjustments you need to note on baitcast reel, loosen or tighten, suitable for casting distance and accuracy. The accuracy is always something that you should always go to. Remember that, slowly, the distance will be further over time you proceed in casting.

How far should a reel be from a rod tip?

Reel in the line. Reel the line in until your bait or lure is 6 to 12 inches (15 to 30 centimeters) from the rod tip. If you have a sinker or bobber attached to the line, it should be 6 to 12 inches from the rod tip instead. Hold the reel properly.

What is the most important thing to know when choosing a baitcasting reel?

But the most important thing when choosing a baitcasting reel is to pick one that feels good in your hand and fits your fishing needs.

Why do you need a baitcasting reel?

You need a baitcasting reel for the best experience. It will help you to catch heavy catches during casts.

How to control the flow of a cast?

You may want to rest your thumb at a slight angle on the spool instead of pressing the very flat of it on the line. This will give you more control over the flow of the line during the cast.

Why is it important to avoid brush when casting?

It’s important to avoid heavy brush or your lure may get stuck when you bring the rod forward to cast. If this happens, the entire spool of line can get tangled (called a bird’s nest) and destroyed.

What hand to use for baitcasting?

If you are casting with a long-handled baitcasting rod of the kind used in saltwater fishing, you’ll want to use your opposite hand as a fulcrum from which to pivot the rod as you cast.

How many testimonials does wikihow have?

wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 12 testimonials and 88% of readers who voted found it helpful, earning it our reader-approved status.