[tp widget="default/tpw_default.php"]

how to add fishing line to a spinning reel插图

How to Put Line on a Spinning Reel: An Easy 4-Step MethodStep 1: Choose the type of fishing line: Mono,Fluoro or Braid Select your preferred type of fishing line. …Step 2: Slide the line under the bail arm Make sure the bail is engaged (in winding rather than casting position). …Step 3: Attach the Line to the Reel Spool …Step 4: Wind the line on to the spool …

How to tie a spinner bait on a fishing line?

Method 1 of 3: Tying a Palomar KnotMeasure out 30 centimetres (12 in) of fishing line. To make sure you have enough line to tie the knot,measure out 30 centimetres (12 in) with a ruler …Fold the line over so you have 15 centimetres (5.9 in) of double line. …Create a small loop and pass it through the eye of the bait. …Tie an overhand knot on the line. …More items…

How to put a fishing line to a baitcasting reel?

Steps To Put Line On A Baitcaster ReelStep: 1- Choose a Good Line. First,you will need to make sure you have or buy a suitable line. …Step: 2 – Soak For A While to Prevent Tangling. You can soak your fishing line for around 30 minutes in warm water,and it will help stop the line …Step: 3 – Continue Threading. …Step: 4 – Rewind the Line. …Step: 5 – Turn the Handle And You’re Done. …

How do you put fishing line on a reel?

You can start from the end of the rod, and then push the line through all the loops and link it towards the reel. Then, you have to knot the line on the reel spool. You can do so by wrapping the end of the line on the spool. Bring the end of the line towards you then tie the line with an arbor knot. Lower the wire arm to close the bail.

How to put a sinker on your fishing line?

Casting – pinch a slip-shot sinker to the fishing line just above the hook to take your bait farther.Bottom fishing – e.g. …Using live bait rigs – you can allow the fish to eat the bait before striking.Fishing in a current – using pyramid sinkers to prevent line twistsTrolling – using a walking sinker

How to keep fishing line taut on spinning reel?

They can keep the line taut either by wearing gloves or by holding a washcloth in their free hand while holding the line gently as it passes, or by applying gentle pressure to the line.

How to help a friend with fishing line?

A friend can help by holding the fishing line’s spool while you reel the line onto the fishing reel. The second person can put a screwdriver or pencil through the spool of the fishing line. to allow the spool to spin and release the fishing line.

What is braided fishing line?

Braided fishing line is also known as Superline. They are thinner, stronger, and are usually created by fusing multiple braided fibers of materials like Dyneema. Braided line is not only strong, but it has an incredibly low stretch. This is why it is essential to pair a braided line with a rod that has some flex.

What are the two main types of fishing line?

There are several types of fishing line out there made from all kinds of materials. However, the two main types that we will focus on today are braided and monofilament fishing line.

How to tie a fishing line to a rod?

Make sure the line is still threaded entirely through all of the eye holes. Cut the end of the line with about 18-inches of line coming out of the last eyehole, then using your favorite knot, tie on a leader, lure, or hook. Attach the hook to one of the support bars that connect the eyehole to the rod.

Where should the eyeholes be on a spinning reel?

With a spinning reel, all the eyeholes should be pointed toward the ground. Last, take your spinning reel and insert it into the designated place holder located on the rod’s base. Make sure to properly tighten all components of the placeholder to ensure your spinning reel is secure.

What happens if your line feels spongy?

If it feels spongy and you can easily push on the line, the line is not taut enough, and you will need to start over.

What happens if you overfill a spinning reel?

If you overfill the spinning reel with line, the line might just pop right off the spool and get tangled up, making a huge mess. If the reel comes with a tab, you can wrap the end of the line around the tab to keep it in place. If not, you might want to feed the line right through the rod’s hoops and attach some tackle to it.

How to load fishing line on spinning reel?

While making sure the spool stays on the ground label side up, use your free hand, specifically your index finger, so apply a good deal of pressure to the fishing line right where the spinning reel is .

How to tie fishing line to arbor?

So, wrap the line around the arbor with the tag end of the line and using the tag end of the line, tie an overhand knot around the standing part.

Why does my spinning reel have to be loaded backwards?

This is because the line needs to be loaded onto the spinning reel the exact same way as it comes off the spool you purchased from the store. If you load the line onto the spinning reel with the label of the purchased spool facing downwards, you will effectively be loading the fishing line backwards, which will undoubtedly cause problems, especially where line memory and tangling is concerned.

How to check if your reel line is twisting?

One thing that you should do is check your line for twisting. Do this by giving it a bit of slack after winding a few layers of line onto the spinning reel. It the line has a big twist in it, you may need to start over and flip over the purchased spool and have the label facing in a different direction.

How far from the rim of a fishing reel should you fill the line?

If all is well and there is no twist in the line, keep cranking the handle backwards, evenly filling up the fishing reel until the line is within 1/8 of an inch from the rim of the reel. If you don’t fill the reel enough, it will cause problems when you go to cast.

What type of line is best for fishing?

If you need really strong line for those big fish, you might want to look into getting braided line.

Step 1: Choose the type of fishing line: Mono, Fluoro or Braid

Select your preferred type of fishing line. If you are using mono or fluoro, you can attach the line straight to the spool following this method. If you are using braided line, lay down 30-60 yards of monofilament line first as a cushion and to stop the braided spinning on the spool.

Step 2: Slide the line under the bail arm

Make sure the bail is engaged (in winding rather than casting position). Slide the line under the bail arm and wrap it around the spinning reel spool.

Step 3: Attach the Line to the Reel Spool

Use the Arbor Knot to attach the line to the spinning reel spool and pull up nice and tight. The Arbor Knot is the only knot you need to know to connect the line to the spool.

Step 4: Wind the line on to the spool

Get a friend or relative to hold the filler spool (or use a fishing reel spooler).

Can I spool a spinning reel direct with braided line?

We don’t recommend this. The braided fishing line has no stretch so it doesn’t bite into the reel spool and grip like monofilament line when you begin spooling the reel. So what happens then is that when you start winding the spool spins without the line being wound up.

Can I spool a spinning reel with fluoro line?

Yes, you can spool a spinning reel with straight fluorocarbon line, but most people don’t. The main reason is that fluoro is much more expensive than monofilament fishing line.

How to avoid line twist when you spool a spinning reel

If you don’t handle the filler spool properly you can wind up getting line twists in the line before you even put it on your spinning reel. And this can lead to problems and tangles when you are on the water in your favourite fishing spot.

What are the different types of fishing reels?

There are different kinds of fishing reels that we also lose count, but there are three types that are widely popular, and they are: 1. Spincast Reel. This is the simplest reel there is, which is why it is best for casual anglers or beginners.

What is the best fishing reel for small fish?

In relation to that, your cast may not be that far since you can only put a bit of fishing line. Therefore, it is best for catching small fishes. 2. Baitcast Reel. This is usually the default choice of anglers who do it for fun because it has a lot of power, so it will be great for distance casting.

How to put fishing line on reel?

How to Put Fishing Line on a Reel: The Three Ways. Let us now move on to the main event and go through the different steps. 1. Spool Line on a Spincast Reel. To spool a fishing line on a spincast reel, you must follow the following steps:

How to rotate a bail?

You can do so by wrapping the end of the line on the spool. Bring the end of the line towards you then tie the line with an arbor knot. Lower the wire arm to close the bail. You can then crank the handle to see where the bail will rotate. Make sure that you load the line on the same direction where it rotates.

How to load a sandbag?

Make sure that you load the line on the same direction where it rotates. Grip the line using your thumb and index finger while making sure that there is tension. Slowly load in the line while cranking the handle until you get most of it loaded. You can then secure the line with a rubber band. 2.

How to remove old bail wire?

Lift the wire arm to open the bail, and then you can remove the old line if there is such.

Do baitcasters have to do the first step?

Spooling a baitcast reel is also the same as spooling a spincast reel, but you do not have to do the first step because you do not have to lift a wire arm to open the bail as baitcasters do not have one.

Choosing the Right Line

A monofilament line is a single-strand line that can have a bit of stretch. The stretch adds to the flexibility of the line, which will help the hook stay secured in the fish’s mouth.

How to Spool a Spinning Reel?

The following section is a step-by-step guide on how to put a line on a spinning reel. At first, you might want another person around to help, but after a while you’ll be able to do this alone.


Properly putting a fishing line on a spinning reel is a pretty easy process that takes some practice to get right. You can also use this method to put fishing line on spincast reels.

How Do You Put Line On A Spinning Reel Without It Twisting?

Many fishermen choose to spool their reels by simply placing a pencil on their line spool and reeling it up .

Why do you soak a reel?

One of the main reasons for soaking a line is relaxing it. This makes it much easier to lay the line on the reel, making the spooling process much easier.

Where is the baitcasting reel placed?

In short, a baitcasting reel is placed on top of your rod so that the spool sits parallel.

What happens when a spool moves faster than the casting line?

Without the proper control, the spool can move faster than the casting line, resulting in the line bunching up and twisting.

How to ensure that the line is secured to the spool?

Ensure that the line is secured to the spool by winding it around twice.

How to finish off a tag?

To finish off, tie another knot on the tag end and pull on the main line so both knots are tight.

What happens if you leave your water line on overnight?

For this reason, if you leave your line overnight, it will become waterlogged.

How to braid a spinning reel?

Simply apply some electrical tape and make sure to wrap it properly and evenly around the spool. The braid will now have something to bite into and won’t slip when you begin to wind it on.

How to tie an arbor knot?

To make an arbor knot, wrap the line around the arbor and tie an over hand knot in the standing line. Tie a second overhand knot in the tag end, just about 1 inches from the first overhand knot. Now, pull the standing line to slide the first knot down to the spool and slide the second knot down to the first.

How to use a cloth on a spool?

Whilst holding the screwdriver and the spool in one hand, your friend should take the cloth with his/her free hand and use it to hold the other side of the spool. They’ll use the cloth on the free hand to put pressure on the spool so when you wind, make sure that the line goes on the reel very tightly.

How to set up a spinning rod?

Step 1: Setting Up. To begin…. First assemble your rod and make sure all the eyes line up, just as you would if you were setting up for fishing. Now grab your spinning reel, insert it in the reel seat and tighten it up so that the spinning reel is secure. Also check which direction the reel turns when you crank it.

How to wrap a spool of a spool?

Simply apply some electrical tape and make sure you’re wrapping it properly and evenly around the spool.

What happens if you don’t leave the bail arm open?

Keeping the bail arm open is necessary. If you don’t leave the bail arm open you’ll have to cut the line and re-tie the knot. Also if the line isn’t under the bail arm, the reel won’t be able to wind the line onto the spool.

How far apart should two chairs be?

Set up the two chairs about 20ft away from each other and take a seat.

What is the difference between a 10 pound test braid and a 10 pound test braid?

Ten pound test monofilament has a much larger diameter than 10 pound test braid, so if your reel is rated for one and you try to spool it up with the other, you may end up with far more or far less line than you expected. Make sure that the spool you’re filling it up from has ample line on it; while there are “filler” spools available, …

How much fluorocarbon to use for spinning reel?

Your spinning reel may hold 175 yards of 8 pound test fluorocarbon, but for many of us the bottom half or even bottom two-thirds of that capacity will never see the light of day during an actual fishing trip. Accordingly, you can add a bit of backing to your reel to avoid wasting precious line. If you’re using braid, a mono or fluoro backing is always essential because the slickness of the braided line will often prevent it from getting a grip on the spool. Thus your line will slip more than your drag would otherwise allow. If it’s your first time filling the spool with fluorocarbon or mono, just fill it up all of the way. On subsequent restringings, you can just remove a portion of the line. Some anglers use electrical tape in place of backing, but this is just likely to leave a sticky mess.

How to string a fishing reel?

How do you tie fishing line to a reel? It’s a simple process. Put your reel on it, thread your line through the guide closest to the reel, open the bail, and then attach it with a few loops around the spool, finished off with a simple overhand knot. Close the bail by hand, make sure that the line is taut, and then put the spool down on the table or the floor with an unobstructed path to the reel. Take note of the way that the spool spins when you retrieve it. You’ll want the line to come off in that same direction—so if you’re seeing it as clockwise, the line should be coming at it clockwise as well. If the proper direction is not immediately obvious to you, then start reeling. If you start getting “pigtails” or “curlicues” at the entering guide, then it means that you are going in the wrong direction.

How to close bail on spinning reel?

While most spinning reels enable you to close the bail by turning the reel handle, get into the practice of closing it manually after each cast. This will keep the line in tight loops without any slack.

How far away should you add line to a reel?

Keep adding line until you are within about 1/8 of an inch of the spool edge. If you add too much, the line may billow off uncontrollably during the cast, but if you underfill the reel you will substantially limit your casting distance. It’s almost always better to go higher and then take line off as needed.

What causes spinning reels to tangle?

The one consistent hobgoblin of spinning reels is line twist. Twisted line, especially if it is monofilament, copolymer, or fluorocarbon, can cause tangles, limit casting distance and reduce your line’s strength. While manufacturers have taken all sorts of preventative measures and developed technological advances to minimize this problem, …

What is an open face spinning reel?

Open-faced spinning reels have been an important part of the North American fishing landscape —in both freshwater and saltwater, for species ranging from minuscule to gigantic—since they came to America after World War Two. They come in a wide range of sizes , at an equally wide range of price points, with corresponding features to best fit